Free UK cost calculator

    House Rewire Cost Calculator

    Estimate the cost of rewiring a UK home. Set the property size and type, choose a full or partial rewire and see a low, typical and high figure with a cost breakdown, expected duration, certification included and the factors most likely to increase the price.

    Page review date (not price evidence):

    Your details

    Property occupied during the work
    Include making good (plastering chased walls; decorating not included)
    New consumer unit

    Points beyond the standard allowance for the property size.

    Outdoor supply or EV charger circuit
    Waste removal included

    Enter a UK postcode (e.g. SW1A, M1, B15) and we'll pick the right regional pricing.

    Indicative estimated cost

    £6,000 – £13,600

    GBP total for the selected job · Model guide: £9,800 (not an observed average)

    House Rewire

    No postcode area supplied · Midlands · broad regional model, not a local quote

    Your selected scope
    Property size
    3 bedrooms
    Property type
    Semi-detached house
    Scope of work
    Full rewire — every circuit replaced
    Property occupied during the work
    Yes
    Include making good (plastering chased walls; decorating not included)
    Yes
    New consumer unit
    Yes
    Additional socket or light points
    0
    Outdoor supply or EV charger circuit
    No
    Waste removal included
    Yes
    Access
    easy
    Timing
    Standard booking
    VAT
    Includes modelled VAT at 20%
    Low
    £6,000
    Model guide
    £9,800
    High
    £13,600
    Whether the house is lived in during the work has a real effect — try switching it.

    What this estimate covers

    Labour
    Included

    Priced in the model: Electrician labour (about 8–11 days); Plastering and making good after chasing.

    Materials
    Included

    Priced in the model: Cable, back boxes, accessories and sundries; 18th Edition consumer unit with RCBOs.

    VAT
    Included

    The range shown includes VAT at 20% because you chose to show prices including VAT. Whether VAT applies to a contractor's quote depends on whether they are VAT-registered.

    Waste removal
    Included

    Priced in the model: Waste removal — One small skip (4 yd).

    Access costs
    Not confirmed

    The model does not price this explicitly. It may be needed for your job; ask the contractor.

    Preparation
    Included

    Priced in the model: Plastering and making good after chasing.

    Estimates are indicative model guide prices for the selected scope and unit, not a quotation. Real prices vary with specification, access, location, materials and site conditions. Whether VAT is charged depends on the contractor and the type of work, so always check what your own quotation states.

    Figures shown include VAT at 20%.

    Compare your quote

    Mark what your written quote says it covers. Your answers stay in this browser tab only and are not saved or sent anywhere.

    These prices may cover different work. Confirm the inclusions before comparing totals.

    Estimate inclusions alongside your quote
    ItemEstimateYour quoteResult
    LabourIncludedNot confirmedUnknown

    Ask: Is all labour in the total, including any extra days if the job overruns?

    MaterialsIncludedNot confirmedUnknown

    Ask: Which materials are supplied in the price, and at what specification or brand?

    VATIncludedNot confirmedUnknown

    Ask: Are you VAT-registered, and is VAT included in this total or added on top?

    Waste removalIncludedNot confirmedUnknown

    Ask: Is removal and disposal of waste (skip, licensed carrier, tip fees) included?

    Access costsNot confirmedNot confirmedUnknown

    Ask: Does the price include scaffolding, towers or other access equipment, and for how long?

    PreparationIncludedNot confirmedUnknown

    Ask: Does the price include stripping out, preparation and making good afterwards?

    Total£6,000 – £13,600Not enteredShown side by side only; not adjusted or judged.

    What can change your price

    General job guidance, not evidence of local prices or a promise that every item is included. Selected options are modelled; other site conditions may require a separate quotation.

    • Number of rooms and circuits — every additional room adds cable runs, accessories and testing.
    • Property type and construction — solid walls, lath and plaster and awkward joist runs all slow the work down.
    • Whether the property is occupied, which means working room by room and protecting furniture.
    • Making good — chasing walls for cables creates plastering work that is often quoted separately; decorating and painting afterwards is excluded from this estimate and needs its own quote.
    • Consumer unit position and the condition of the incoming supply; a meter or main fuse upgrade is a DNO cost.
    • Region — electrician day rates in London and the South are typically 10–25% above the North.

    Questions to ask before comparing written quotes

    • Which circuits, sockets and fittings are being replaced?
    • Are the consumer unit, testing and notification included?
    • What wall repairs, decorating and waste disposal are included?
    • What is the final total with VAT, payment stages and a written process for approving extras?

    Basis and limits of this estimate

    Source: fixed rates and allowances built into this calculator, used as indicative model assumptions. No linked price source, verified quote provenance, sample size or evidence-based confidence score is available for these rates. The separate seeded price database does not power this calculation.

    Freshness: no evidence update date is recorded for the fixed rates. A page review date or calculation date is not a price-evidence update. Rates may be out of date; check current written quotations.

    Location: Midlands uses a model regional multiplier of ×1.00 against the Midlands baseline. The adjustment is applied fully to labour, at 70% strength to hire, at 30% strength to materials and not to fixed costs. These are broad model assumptions, not measured local quote differences. Scotland, Wales and Northern Ireland share the North bracket; no separate local rates are used.

    Method: Existing model line items are added after regional, timing and selected access adjustments; the VAT option adds 20% when selected. The breakdown and arithmetic assumptions are shown below.

    Uncertainty: this is a broad starting range, not a local market survey, guaranteed fair price or quotation. The midpoint is a model guide, not an observed average or the price most jobs pay. Unknown site conditions and specification changes can move actual quotations outside this range; the range is not a statistical confidence interval.

    Cost breakdown

    Estimated cost by element of the job
    ElementLowHigh
    Electrician labour (about 8–11 days)Labour

    Working around an occupied home adds roughly 12% to the time.

    £2,050£4,500
    Cable, back boxes, accessories and sundriesMaterials£1,100£1,900
    18th Edition consumer unit with RCBOsMaterials

    Supply only; the fitting time is in the labour line.

    £320£700
    Plastering and making good after chasingLabour

    Most electricians leave walls chased and patched, not decorated.

    £1,200£3,600
    Waste removal — One small skip (4 yd)Hire / disposal£220£380
    Electrical Installation Certificate and Part P notificationFixed cost£120£300
    Subtotal excluding VAT£5,000£11,400
    VAT at 20%£1,000£2,250
    Total including VAT£6,000£13,600

    These are model allowances for your selected specification, not supplier quotations. Labour, materials and hire are the model's categories, not independently verified costs. Lines and totals are rounded separately, so displayed lines may not sum exactly to the total.

    Modelled duration

    8–11 working days

    Assumes one electrician, or two on larger properties.

    Working days on site, not calendar days. Ordering materials, scaffolding and weather can spread the same work over a longer period.

    Reasons the price could rise

    • Solid walls, concrete floors or lath and plaster ceilings, which make cable runs far slower.
    • Asbestos in artex or old boards, requiring a licensed contractor.
    • An unexpectedly poor incoming supply or earthing arrangement needing DNO involvement.
    • Listed buildings and flats with communal risers, where routes are restricted.
    • Deciding to add circuits, spotlights or smart controls once walls are open.

    Modelled inclusions — priced items

    Only the items costed by the model are listed; these are not guarantees of what a contractor will include. Removal labour does not mean off-site disposal unless a disposal allowance is listed.

    • Electrician labour (about 8–11 days)
    • Cable, back boxes, accessories and sundries
    • 18th Edition consumer unit with RCBOs
    • Plastering and making good after chasing
    • Waste removal — One small skip (4 yd)
    • Electrical Installation Certificate and Part P notification

    Exclusions and work to quote separately

    • Decorating, painting and floor coverings
    • Light fittings, spotlights and appliances unless agreed
    • The EV charger unit itself, and any DNO supply upgrade
    • Asbestos survey or removal in older properties

    Have a quotation for this work?

    Compare it against this range, then have the written quotation examined line by line — including the items that may be missing from it.

    How we worked this out

    Calculated on (not an evidence update date) · Area used: Midlands (regional adjustment ×1.00) · Standard booking

    This is a fixed-rate model; no evidence-based confidence rating is available.

    Methodology
    • Rewires are priced on electrician days on site — the dominant cost — plus cable and accessories, then certification as a fixed cost.
    • A partial rewire is costed at about 45% of a full rewire for the same property, and a consumer unit swap at about 12%.
    • We price each part of the job separately — labour, materials, plant hire and fixed costs — then add them up, rather than applying one blanket rate.
    • Regional adjustment is applied in full to labour, at about 70% to plant hire and at about 30% to materials, because materials are largely priced nationally.
    • An emergency or urgent booking adds about 50% to labour, 20% to hire and 10% to materials. Fixed costs such as permits and certificates do not change.
    • Figures are rounded to a sensible step (£10 to £500 depending on size), because the underlying data does not support pound-level precision.
    Model assumptions used
    • Priced for a standard domestic property with normal stud or plastered masonry walls.
    • You will be living in the property during the work, so it is done room by room.
    • The property is a standard UK domestic property in reasonable condition, with no structural defects found once work starts.
    • Work is carried out by a competent VAT-registered contractor to current Building Regulations.
    • Prices are for the work described only, and assume the customer is not supplying their own materials.
    • VAT at 20% is included in the figures shown.
    • Access was assumed to be straightforward, with somewhere to park and unload.

    This is an indicative estimate for UK customers, not a quotation, a survey or a valuation. It uses fixed model rates and your answers, not verified quotations. Unknown property conditions are not surveyed; no evidence-based widening of this range is performed. Obtain comparable written quotations before committing.

    Frequently asked questions

    Is certification included?

    Yes. The estimate assumes an Electrical Installation Certificate and Building Regulations notification through a competent-person scheme. Any quotation without certification is not a complete rewire — ask which scheme the electrician is registered with.

    What is the difference between a full and a partial rewire?

    A full rewire replaces all cabling, accessories and the consumer unit throughout. A partial rewire keeps sound existing circuits and replaces only the problem ones — commonly the kitchen, bathroom and consumer unit. A partial job is cheaper but should still be certified.

    Do I have to move out?

    Not usually, but it costs more to stay. Working around occupants means shorter working areas, more protection and more visits, which is why the occupied option increases the labour allowance.

    What is the difference between standard and emergency timing?

    Standard assumes a booked-in job with normal lead times. Emergency covers urgent work such as an unsafe installation needing immediate attention, and adds around 50% to labour, 20% to hire and 10% to materials.

    Is VAT included?

    You can show the figures with or without VAT at 20%. Most electrical contractors of any size are VAT registered.

    Use this range as your benchmark, then have your written quotation examined line by line — including what may be missing from it.

    How to use this: TradesChecker is an independent service for UK customers. Estimates are indicative, not a quotation or a survey — specification, access, location, materials, VAT and site conditions all affect real prices. Commercial relationships never determine what we report about a quotation. Read our methodology.

    Related cost guides

    Related Calculators