Free UK cost calculator

    Roof Replacement Cost Calculator

    Estimate the cost of a full roof replacement in the UK from your roof area, covering and site conditions. You get a low, typical and high figure, a breakdown of where the money goes, an expected duration and the things most likely to push the price up.

    Page review date (not price evidence):

    Your details

    m²

    Plan area of the roof. A typical three-bedroom semi is around 70–100 m².

    Waste removal included
    New fascia, soffit and guttering
    Chimney repointing
    Loft insulation top-up
    Allow for timber and structural repairs

    Enter a UK postcode (e.g. SW1A, M1, B15) and we'll pick the right regional pricing.

    Indicative estimated cost

    £9,100 – £16,800

    GBP total for the selected job · Model guide: £12,900 (not an observed average)

    Roof Replacement

    No postcode area supplied · Midlands · broad regional model, not a local quote

    Your selected scope
    Roof area
    85 m²
    New covering
    Concrete interlocking tiles
    Roof shape and pitch
    Standard pitch (25–40°)
    Scaffolding
    Full scaffold, all elevations
    Waste removal included
    Yes
    New fascia, soffit and guttering
    No
    Chimney repointing
    No
    Loft insulation top-up
    No
    Allow for timber and structural repairs
    No
    Access
    easy
    Timing
    Standard booking
    VAT
    Includes modelled VAT at 20%
    Low
    £9,100
    Model guide
    £12,900
    High
    £16,800
    Priced on 85 m² of roof area. Change any answer to compare coverings and specifications side by side.

    What this estimate covers

    Labour
    Included

    Priced in the model: Strip existing covering; Roofing labour.

    Materials
    Included

    Priced in the model: Roof covering, membrane and battens (85 m²); Leadwork, flashings, ridge and verge.

    VAT
    Included

    The range shown includes VAT at 20% because you chose to show prices including VAT. Whether VAT applies to a contractor's quote depends on whether they are VAT-registered.

    Waste removal
    Included

    Priced in the model: Waste removal — One builders skip (8 yd).

    Access costs
    Included

    Priced in the model: Full scaffold, all elevations.

    Preparation
    Included

    Priced in the model: Strip existing covering.

    Estimates are indicative model guide prices for the selected scope and unit, not a quotation. Real prices vary with specification, access, location, materials and site conditions. Whether VAT is charged depends on the contractor and the type of work, so always check what your own quotation states.

    Figures shown include VAT at 20%.

    Compare your quote

    Mark what your written quote says it covers. Your answers stay in this browser tab only and are not saved or sent anywhere.

    These prices may cover different work. Confirm the inclusions before comparing totals.

    Estimate inclusions alongside your quote
    ItemEstimateYour quoteResult
    LabourIncludedNot confirmedUnknown

    Ask: Is all labour in the total, including any extra days if the job overruns?

    MaterialsIncludedNot confirmedUnknown

    Ask: Which materials are supplied in the price, and at what specification or brand?

    VATIncludedNot confirmedUnknown

    Ask: Are you VAT-registered, and is VAT included in this total or added on top?

    Waste removalIncludedNot confirmedUnknown

    Ask: Is removal and disposal of waste (skip, licensed carrier, tip fees) included?

    Access costsIncludedNot confirmedUnknown

    Ask: Does the price include scaffolding, towers or other access equipment, and for how long?

    PreparationIncludedNot confirmedUnknown

    Ask: Does the price include stripping out, preparation and making good afterwards?

    Total£9,100 – £16,800Not enteredShown side by side only; not adjusted or judged.

    What can change your price

    General job guidance, not evidence of local prices or a promise that every item is included. Selected options are modelled; other site conditions may require a separate quotation.

    • Roof area and pitch — steep, complex roofs with valleys and dormers take far longer to strip and re-cover.
    • Covering — natural slate can cost three times as much per square metre as concrete tiles.
    • Scaffolding — a full wrap is typically £1,400–£3,200 for a standard hire period.
    • Waste — a stripped pitched roof is heavy and usually fills more than one skip.
    • Hidden repairs — rotten battens, decking and rafter ends are only found once the covering is off.
    • Region — labour in London and the South typically carries a 10–25% premium over the North.

    Questions to ask before comparing written quotes

    • What roof area, covering and membrane specification are you quoting for?
    • Are scaffold hire, permits and waste disposal itemised?
    • How will hidden timber repairs be priced and approved?
    • What is the final total with VAT, payment stages and a written process for approving extras?

    Basis and limits of this estimate

    Source: fixed rates and allowances built into this calculator, used as indicative model assumptions. No linked price source, verified quote provenance, sample size or evidence-based confidence score is available for these rates. The separate seeded price database does not power this calculation.

    Freshness: no evidence update date is recorded for the fixed rates. A page review date or calculation date is not a price-evidence update. Rates may be out of date; check current written quotations.

    Location: Midlands uses a model regional multiplier of ×1.00 against the Midlands baseline. The adjustment is applied fully to labour, at 70% strength to hire, at 30% strength to materials and not to fixed costs. These are broad model assumptions, not measured local quote differences. Scotland, Wales and Northern Ireland share the North bracket; no separate local rates are used.

    Method: Existing model line items are added after regional, timing and selected access adjustments; the VAT option adds 20% when selected. The breakdown and arithmetic assumptions are shown below.

    Uncertainty: this is a broad starting range, not a local market survey, guaranteed fair price or quotation. The midpoint is a model guide, not an observed average or the price most jobs pay. Unknown site conditions and specification changes can move actual quotations outside this range; the range is not a statistical confidence interval.

    Cost breakdown

    Estimated cost by element of the job
    ElementLowHigh
    Strip existing coveringLabour

    Removing tiles or felt, battens and old membrane by hand.

    £775£1,350
    Roof covering, membrane and battens (85 m²)Materials£2,200£3,550
    Roofing labourLabour

    Felting, battening, re-covering, ridge and verge work.

    £2,550£4,100
    Leadwork, flashings, ridge and vergeMaterials£350£1,200
    Full scaffold, all elevationsHire / disposal

    Typical hire period of two to four weeks.

    £1,400£3,200
    Waste removal — One builders skip (8 yd)Hire / disposal

    Old tiles are heavy; a stripped pitched roof usually fills more than one skip.

    £320£550
    Subtotal excluding VAT£7,600£14,000
    VAT at 20%£1,525£2,800
    Total including VAT£9,100£16,800

    These are model allowances for your selected specification, not supplier quotations. Labour, materials and hire are the model's categories, not independently verified costs. Lines and totals are rounded separately, so displayed lines may not sum exactly to the total.

    Modelled duration

    6.5–11 working days

    Based on a crew of 2 working around 8 hours a day.

    Working days on site, not calendar days. Ordering materials, scaffolding and weather can spread the same work over a longer period.

    Reasons the price could rise

    • Rotten battens, decking or rafter ends found once the covering is off.
    • Chimney stacks, valleys and dormers each add labour and leadwork.
    • Long or shared scaffold runs, or a pavement licence in a terraced street.
    • Natural slate and clay prices move with supply; second-hand matching slate can cost far more.
    • Bad weather during the works extends scaffold hire.

    Modelled inclusions — priced items

    Only the items costed by the model are listed; these are not guarantees of what a contractor will include. Removal labour does not mean off-site disposal unless a disposal allowance is listed.

    • Strip existing covering
    • Roof covering, membrane and battens (85 m²)
    • Roofing labour
    • Leadwork, flashings, ridge and verge
    • Full scaffold, all elevations
    • Waste removal — One builders skip (8 yd)

    Exclusions and work to quote separately

    • Replacing rafters, purlins or a full new roof structure
    • Dormer, velux or rooflight installation
    • Rendering, repointing of walls or gable repairs
    • Planning permission or listed building consent where required

    Have a quotation for this work?

    Compare it against this range, then have the written quotation examined line by line — including the items that may be missing from it.

    How we worked this out

    Calculated on (not an evidence update date) · Area used: Midlands (regional adjustment ×1.00) · Standard booking

    This is a fixed-rate model; no evidence-based confidence rating is available.

    Methodology
    • Roof work is priced per square metre of roof area, split into strip-out labour, covering materials and re-covering labour, with leadwork, scaffolding and waste added separately.
    • Steep or complex roofs carry a 30% labour uplift for the extra time working at pitch, around valleys and dormers.
    • We price each part of the job separately — labour, materials, plant hire and fixed costs — then add them up, rather than applying one blanket rate.
    • Regional adjustment is applied in full to labour, at about 70% to plant hire and at about 30% to materials, because materials are largely priced nationally.
    • An emergency or urgent booking adds about 50% to labour, 20% to hire and 10% to materials. Fixed costs such as permits and certificates do not change.
    • Figures are rounded to a sensible step (£10 to £500 depending on size), because the underlying data does not support pound-level precision.
    Model assumptions used
    • Priced on a roof plan area of 85 m² with a standard pitch (25–40°).
    • The existing roof structure is sound and does not need replacing.
    • The property is a standard UK domestic property in reasonable condition, with no structural defects found once work starts.
    • Work is carried out by a competent VAT-registered contractor to current Building Regulations.
    • Prices are for the work described only, and assume the customer is not supplying their own materials.
    • VAT at 20% is included in the figures shown.
    • Access was assumed to be straightforward, with somewhere to park and unload.

    This is an indicative estimate for UK customers, not a quotation, a survey or a valuation. It uses fixed model rates and your answers, not verified quotations. Unknown property conditions are not surveyed; no evidence-based widening of this range is performed. Obtain comparable written quotations before committing.

    Frequently asked questions

    How do I work out my roof area?

    For a simple gable roof, multiply the length of the house by the slope length of one side, then double it. As a rough guide, the roof area of a typical three-bedroom semi is about 70–100 m². If you are unsure, use the nearest figure — the estimate is a range, not a fixed price.

    Does the estimate include scaffolding?

    Only if you select it. Scaffolding is shown as its own line in the breakdown so you can see what it contributes. Most pitched roof replacements need scaffolding to all elevations for safe working at height.

    Why is there an allowance for structural repairs?

    Because battens, decking and rafter ends can only be inspected once the covering is stripped. Turning that option on adds a contingency so the figure is not artificially low; a good quotation will state a rate for such repairs rather than ignoring them.

    What is the difference between standard and emergency timing?

    Standard assumes a normal lead time and business-hour working. Emergency reflects urgent work such as storm damage: we add about 50% to labour, 20% to scaffolding and plant hire and 10% to materials, and leave fixed costs unchanged.

    Is VAT included?

    You can switch between including and excluding VAT. Most established roofing contractors are VAT registered, so if a quotation looks unusually low it is worth checking whether VAT has been added.

    Use this range as your benchmark, then have your written quotation examined line by line — including what may be missing from it.

    How to use this: TradesChecker is an independent service for UK customers. Estimates are indicative, not a quotation or a survey — specification, access, location, materials, VAT and site conditions all affect real prices. Commercial relationships never determine what we report about a quotation. Read our methodology.

    Related cost guides

    Related Calculators