How much does an air source heat pump cost in the UK?
    7 min read · UK 2026

    How much does an air source heat pump cost in the UK?

    Real 2026 UK prices for air source heat pump installs — unit, hot water cylinder, radiator upgrades and the BUS grant — plus what 'heat pump ready' actually means.

    Air source heat pumps (ASHPs) are now the default low-carbon heating option for UK homes, but pricing is all over the place — partly because the £7,500 Boiler Upgrade Scheme grant lets some installers quietly inflate their list price.

    This guide shows what ASHPs actually cost to install in the UK in 2026, before and after grant, plus the upgrades the survey usually surfaces.

    See typical UK prices for your job

    Compare your quote against typical UK regional prices — free, no sign-up.

    Open calculator
    Share:

    What you're actually paying for

    A typical install includes: the outdoor heat pump unit, a new hot water cylinder (most homes need this), buffer tank if specified, all internal pipework, controls and commissioning. Bigger radiators or underfloor are often needed because heat pumps run cooler than gas boilers.

    Expect £10,000–£16,000 before grant for a typical 3-bed semi. The £7,500 BUS grant brings net cost to £2,500–£8,500. Larger detached homes run £14,000–£22,000 before grant.

    The radiator upgrade trap

    Heat pumps work best at flow temperatures of 35–50°C, versus 60–75°C for a gas boiler. Most existing radiators were sized for boiler temperatures — at heat pump temperatures they output 30–50% less heat.

    A proper survey will identify which radiators need uprating. Quotes that don't mention radiators at all on a system designed for under 50°C are either undersized or assume you'll be cold.

    Insulation matters more than the unit

    A heat pump in a poorly insulated home will work harder, run more expensively and underperform. Loft insulation, cavity wall insulation and draughtproofing should be sorted first — many MCS surveys now refuse to install in homes below EPC D unless improvements are agreed.

    Real UK price examples

    Typical 2026 ranges based on submitted quotes and regional pricing data.

    ASHP — 3-bed semi (before grant)
    8–10kW unit, new cylinder, basic rad upgrades
    Low
    £10,000
    Typical
    £13,000
    High
    £16,000
    ASHP — 3-bed semi (after £7,500 BUS grant)
    Net cost to homeowner
    Low
    £2,500
    Typical
    £5,500
    High
    £8,500
    ASHP — 4/5-bed detached (before grant)
    12–16kW unit, larger cylinder, radiator upgrades
    Low
    £14,000
    Typical
    £18,000
    High
    £22,000
    Radiator upgrade only (per radiator)
    Like-for-like swap to higher output
    Low
    £220
    Typical
    £320
    High
    £450
    Hot water cylinder upgrade
    200L unvented, MCS-spec
    Low
    £1,200
    Typical
    £1,700
    High
    £2,400

    Key takeaways

    • Most UK homes pay £2,500–£8,500 net after the £7,500 Boiler Upgrade Scheme grant.
    • Radiator upgrades are normal — quotes that ignore them are either undersized or assume cold rooms.
    • Insulate first. A heat pump in a draughty home will run expensively.
    • MCS certification is required for the BUS grant — verify the installer is registered before signing.
    • Get three quotes — list-price inflation is common because installers know the grant absorbs £7,500.

    Frequently asked questions

    Avoid overpaying

    Check your quote against UK pricing data

    Get a fair-price range for your job in 30 seconds. Free, independent, no sign-up.

    Related guides

    More honest UK pricing guides you might find useful.

    All guides
    Back to all guides