UK Cost Guide · 2026

    Exterior House Cleaning Cost UK 2026: Soft Wash & Render Cleaning Prices

    Most UK homeowners pay £5–£12 per m² of elevation for a professional soft-wash exterior clean, so a typical 3-bed semi (80–120m² of visible wall) works out around £600–£1,200. Add £60–£140 for a fascia and gutter-line wipe.

    UK operator soft-washing the render on a British semi with a low-pressure reach pole

    Exterior house cleaning — sometimes sold as 'soft washing' or 'render cleaning' — is the low-pressure, biocide-based way to remove algae, black spot, lichen and general grime from external walls. Unlike pressure washing, it can't damage render, blow water into cavities or force paint off brickwork. UK prices depend on the surface, the area in square metres, the height of the house and how heavy the algae growth is. Use the ranges below to sanity-check quotes for render, brick, pebbledash and UPVC cladding.

    Cost breakdown

    ItemUK price range
    Render (K-Rend / silicone) per m²£6 – £10
    Painted render per m²£7 – £12
    Brickwork per m²£5 – £9
    Pebbledash per m²£6 – £11
    UPVC / composite cladding per m²£7 – £12
    Typical 3-bed semi (80–120m² elevation)£600 – £1,200
    Typical 4-bed detached (150–220m² elevation)£1,000 – £2,200
    Add: fascia, soffit & gutter-line wipe£60 – £140
    Add: UPVC window frames & sills£45 – £110
    Add: scaffold tower (day hire)£180 – £320
    Minimum call-out£180 – £260

    London and the South East typically sit 10–25% above these ranges. Heavy red algae, lichen or 3-storey properties can push per-m² rates 20–35% higher.

    Got a quote already? See if you're being overcharged →

    Quick price estimator

    Drag the slider to get an instant ballpark for your job before you compare quotes.

    100 m²
    20 m²300 m²

    Typical UK soft-wash price by elevation area — subject to the £180–£260 minimum call-out.

    Estimated UK price range

    £500 – £1,200

    Midpoint approx. £850

    Compare real quotes

    Fascia, window frame and scaffold add-ons add £100–£560+ on top depending on access.

    What affects the cost

    • Surface — painted render and pebbledash take longer per m² than smooth brick
    • Total elevation area — bigger jobs earn a better per-m² rate
    • Number of storeys — reach-pole time and safety add real cost above 2 storeys
    • How heavy the algae is — north-facing black spot and red algae need stronger biocide
    • Whether fascia, soffit and gutter-line are included
    • Access — scaffold towers, tight side alleys and no outside tap add setup time
    • Region — London and the South East sit above average

    When you need this service

    • Render has gone green, pink or streaky black
    • Selling the house — a soft wash is one of the best kerb-appeal jobs per £ spent
    • New render is discolouring after 3–5 years — biocide restores it without recoating
    • Pebbledash is going patchy and dark, especially on north elevations
    • UPVC cladding, soffits or bargeboards have algae staining

    How to avoid overpaying

    • Get a per-m² price plus a total elevation figure — don't accept a vague 'whole house' quote
    • Insist on soft washing for render, painted walls, roof tiles and cladding — never high-pressure
    • Ask what biocide is used and whether a second dwell-and-rinse pass is included
    • Bundle fascia, soffit and gutter-line wipe into the same visit — it's much cheaper than a separate call-out
    • Don't pay for scaffold if the operator has proper reach poles (up to 40ft covers most UK homes)

    Everyday impact

    Algae, lichen and black spot on external walls don't just look bad — over time they hold moisture against render and paintwork, which shortens the life of the finish and can lead to render cracking or blown paint. A single soft wash removes years of build-up and, because the biocide kills the growth at the root, the clean typically lasts 3–5 years — dramatically longer than a jet-wash. Compared with re-rendering (£45–£90 per m²) or repainting the exterior (£12–£25 per m²), a soft wash at ~£8/m² is a genuinely cost-effective way to keep a UK home looking maintained.

    Frequently asked questions

    How much does exterior house cleaning cost in the UK?+

    £5–£12 per m² of elevation for a professional soft-wash job, subject to a £180–£260 minimum call-out. A 3-bed semi with 80–120m² of visible wall is typically £600–£1,200; a 4-bed detached with 150–220m² is £1,000–£2,200.

    Is soft washing the same as pressure washing?+

    No. Soft washing uses low pressure (about the same as a garden hose) plus a biocide solution that kills algae and lichen at the root. Pressure washing uses high-pressure water on hard surfaces like driveways and patios. For render, painted walls, roof tiles and cladding, soft washing is the only safe option — high pressure would blow render off the wall.

    Will the clean damage my render or paintwork?+

    A proper soft wash won't. The biocide is applied at low pressure and left to dwell for 15–30 minutes before a gentle rinse, so nothing is being blasted at the surface. It's the standard method recommended by render manufacturers like K-Rend and Weber.

    How long does a soft wash last?+

    3–5 years for most UK homes, versus 12–18 months for a pressure wash. North-facing walls, houses under trees and coastal properties often need a lighter biocide top-up at 2–3 years to keep the finish clean.

    Do I need to be home?+

    Usually not, as long as the operator has access to an outside tap and all sides of the property. Pets should stay indoors during the treatment and for 2–3 hours after; plants should be pre-wetted (the operator will handle this).

    Can they clean the roof at the same time?+

    Yes, and it's usually cheaper to bundle. Soft-wash roof cleaning runs £8–£15 per m² of roof plan area. Ask for scrape + biocide rather than pressure washing — high pressure loosens the sand from concrete tiles and shortens the roof's life.

    Free UK cost tool

    Get your instant estimate

    Use our Exterior House Cleaning Cost Calculator to see a realistic UK low, average and high price range before you request quotes from local tradespeople.

    Related calculators for this project

    Check a real quotation for this job

    Get matched with vetted UK soft-wash operators using low-pressure biocide systems and reach poles, with fascia, cladding and roof cleaning options quoted upfront. Enter the figure you've been quoted to see whether it sits within the expected range for your area, or upload the written quotation to have it examined line by line.

    How to use this: TradesChecker is an independent service for UK customers. Estimates are indicative, not a quotation or a survey — specification, access, location, materials, VAT and site conditions all affect real prices. Commercial relationships never determine what we report about a quotation. Read our methodology.

    Related cost guides