Free UK cost calculator

    Pressure Washing Cost Calculator

    Estimate the cost of professional pressure washing for a driveway, patio, path or deck. Prices use 2026 UK rates for rotary-head jet washing with wet-vac water recovery.

    Page review date (not price evidence):

    Your details

    Kiln-dried sand re-sweep (block paving)
    Apply sealer after clean
    Pre-clean weed / moss treatment

    Enter a UK postcode (e.g. SW1A, M1, B15) and we'll pick the right regional pricing.

    Indicative estimated cost

    £160 – £280

    GBP total for the selected job · Model guide: £220 (not an observed average)

    Pressure Washing

    No postcode area supplied · Midlands · broad regional model, not a local quote

    Your selected scope
    Surface type
    Driveway (block paving / concrete)
    Area to clean (m²)
    40
    Current condition
    Moderate — 1–2 years of dirt, some moss
    Kiln-dried sand re-sweep (block paving)
    No
    Apply sealer after clean
    No
    Pre-clean weed / moss treatment
    No
    Urgency
    Standard booking
    Low
    £160
    Model guide
    £220
    High
    £280

    What this estimate covers

    Labour
    Not confirmed

    This calculator gives a single fixed-rate range without itemised costs, so it does not establish whether this is included.

    Materials
    Not confirmed

    This calculator gives a single fixed-rate range without itemised costs, so it does not establish whether this is included.

    VAT
    Not confirmed

    This calculator does not state whether its range includes VAT. Whether VAT applies to a contractor's quote depends on whether they are VAT-registered.

    Waste removal
    Not confirmed

    The model does not price this explicitly. It may be needed for your job; ask the contractor.

    Access costs
    Not confirmed

    The model does not price this explicitly. It may be needed for your job; ask the contractor.

    Preparation
    Not confirmed

    The model does not price this explicitly. It may be needed for your job; ask the contractor.

    Estimates are indicative model guide prices for the selected scope and unit, not a quotation. Real prices vary with specification, access, location, materials and site conditions. Whether VAT is charged depends on the contractor and the type of work, so always check what your own quotation states.

    Timing assumption: the model uses its standard rate for "Standard booking". "Emergency / urgent call-out" multiplies the simple estimate by 1.5; this uplift is an assumption, not measured call-out evidence.

    Already have a quotation?

    Check it against this estimate

    Compare your quote

    Mark what your written quote says it covers. Your answers stay in this browser tab only and are not saved or sent anywhere.

    These prices may cover different work. Confirm the inclusions before comparing totals.

    Estimate inclusions alongside your quote
    ItemEstimateYour quoteResult
    LabourNot confirmedNot confirmedUnknown

    Ask: Is all labour in the total, including any extra days if the job overruns?

    MaterialsNot confirmedNot confirmedUnknown

    Ask: Which materials are supplied in the price, and at what specification or brand?

    VATNot confirmedNot confirmedUnknown

    Ask: Are you VAT-registered, and is VAT included in this total or added on top?

    Waste removalNot confirmedNot confirmedUnknown

    Ask: Is removal and disposal of waste (skip, licensed carrier, tip fees) included?

    Access costsNot confirmedNot confirmedUnknown

    Ask: Does the price include scaffolding, towers or other access equipment, and for how long?

    PreparationNot confirmedNot confirmedUnknown

    Ask: Does the price include stripping out, preparation and making good afterwards?

    Total£160 – £280Not enteredShown side by side only; not adjusted or judged.

    What is modelled — and what to check

    The base allowance covers the selected job and size/specification, with the adjustments shown in your answers. This calculator does not itemise the base allowance, so individual labour, materials and disposal inclusions cannot be confirmed from it.

    • Kiln-dried sand re-sweep (block paving): not selected; no separate allowance is added.
    • Apply sealer after clean: not selected; no separate allowance is added.
    • Pre-clean weed / moss treatment: not selected; no separate allowance is added.

    Not separately priced or confirmed: work outside the selected scope, hidden defects, additional access needs, fees and approvals, and waste/disposal unless explicitly listed as an allowance. Removal work does not by itself confirm off-site disposal. Ask for these in the written quotation.

    VAT is not separately calculated in this simple model; whether the base rates include it is not documented. Ask for the final total, VAT treatment and separate labour/materials amounts before comparing quotes.

    What can change your price

    General job guidance, not evidence of local prices or a promise that every item is included. Selected options are modelled; other site conditions may require a separate quotation.

    • Surface type — patios and decking take longer per m² than open block-paved driveways.
    • Area (m²) — bigger areas get a better per-m² rate, but total price rises with size.
    • Condition — heavy black spot, thick moss and years of build-up need slower passes and pre-treatment.
    • Re-sanding — kiln-dried sand re-sweep on block paving is £1.50–£3 per m² on top of the clean.
    • Sealing — a patio/driveway sealer coat adds £4–£9 per m² for materials and labour.
    • Weed treatment — a pre-clean glyphosate or hot-foam treatment adds £20–£45.
    • Region — London and the South East typically sit 10–25% above the North and Midlands.

    Questions to ask before comparing written quotes

    • What measured area and surface-safe cleaning method are specified?
    • Are re-sanding, sealing and weed treatment itemised?
    • Who supplies water and handles slurry, drainage and debris disposal?
    • What is the final total with VAT, payment stages and a written process for approving extras?

    Basis and limits of this estimate

    Source: fixed rates and allowances built into this calculator, used as indicative model assumptions. No linked price source, verified quote provenance, sample size or evidence-based confidence score is available for these rates. The separate seeded price database does not power this calculation.

    Freshness: no evidence update date is recorded for the fixed rates. A page review date or calculation date is not a price-evidence update. Rates may be out of date; check current written quotations.

    Location: Midlands uses a model regional multiplier of ×1.00 against the Midlands baseline. This multiplier is applied to the model cost before any selected grant deduction. These are broad model assumptions, not measured local quote differences. Scotland, Wales and Northern Ireland share the North bracket; no separate local rates are used.

    Method: Existing job bands or quantity-based rates are combined with selected allowances, region and timing adjustments. An emergency choice adds 50% to the simple model total. No live quote matching is performed.

    Uncertainty: this is a broad starting range, not a local market survey, guaranteed fair price or quotation. The midpoint is a model guide, not an observed average or the price most jobs pay. Unknown site conditions and specification changes can move actual quotations outside this range; the range is not a statistical confidence interval.

    Doing some of the prep or finishing yourself? Browse tools and materials at Tooled Up.

    Affiliate link

    Frequently asked questions

    How much does pressure washing cost per m² in the UK?

    Block-paved driveways typically cost £4–£7 per m² and patios £5–£9 per m². Decking is higher at £6–£11 per m² because timber needs a gentler, slower pass. Most operators apply a £90–£140 minimum call-out for smaller jobs.

    How much for a typical driveway?

    A standard 40m² block-paved driveway in moderate condition works out around £180–£300, including wet-vac recovery. Add £60–£120 for a kiln-dried sand re-sweep to lock the joints back in.

    Is sealing worth paying for?

    Sealing a driveway or patio after cleaning adds £4–£9 per m² but slows re-growth of moss and weeds, deepens the colour and helps the paving stay clean for 2–4 years. Most homeowners seal every 3rd or 4th clean.

    What's the difference between pressure washing and soft washing?

    Pressure washing uses high-pressure water for hard surfaces like paving and driveways. Soft washing uses low pressure and a biocide solution — safer for render, roof tiles and painted brickwork where high pressure would damage the surface.

    Do I need to be home?

    Usually not, as long as the operator has access to an outside tap and a way in through side gates. Book in advance if parking is on-street.

    How long does it last?

    A pressure-washed driveway looks new for 12–24 months in most UK gardens. Shaded, north-facing driveways under trees green up faster and often need annual cleans; sealed driveways can hold their look for 2–4 years.

    Use this range as your benchmark, then have your written quotation examined line by line — including what may be missing from it.

    How to use this: TradesChecker is an independent service for UK customers. Estimates are indicative, not a quotation or a survey — specification, access, location, materials, VAT and site conditions all affect real prices. Commercial relationships never determine what we report about a quotation. Read our methodology.

    Related cost guides

    Related articles

    Related Calculators