UK Cost Guide · 2026
Driveway Installation Cost UK 2026: Block Paving, Resin and Tarmac Prices
A typical UK driveway costs £2,500–£7,500 in 2026. Block paving runs £80–£140/m², resin-bound £60–£110/m² and tarmac £50–£90/m².

Driveway prices in the UK vary by material, size and how much groundwork your existing surface needs. Use the per-m² ranges below to see what a fair quote looks like for your home.
Cost breakdown
| Item | UK price range |
|---|---|
| Block paving (per m²) | £80 – £140 |
| Resin-bound (per m²) | £60 – £110 |
| Tarmac (per m²) | £50 – £90 |
| Concrete (per m²) | £55 – £100 |
| Small drive (~25 m²) | £1,800 – £3,500 |
| Average drive (~50 m²) | £3,500 – £7,500 |
| Large drive (~80 m²) | £6,000 – £12,000 |
Drainage upgrades and dropped kerbs can add £800–£2,500.
Got a quote already? See if you're being overcharged →
Quick price estimator
Drag the slider to get an instant ballpark for your job before you compare quotes.
Average UK block paving driveway. Tarmac is ~30% cheaper, resin similar.
Estimated UK price range
£3,800 – £7,300
Midpoint approx. £5,550
Compare real quotesDrainage upgrades and dropped kerbs can add £800–£2,500.
What affects the cost
- Material chosen (block, resin, tarmac, concrete)
- Size in m² and shape complexity
- Whether the existing drive needs removing
- Sub-base depth and ground conditions
- Drainage requirements (SuDS compliance)
- Edging, kerbs and decorative borders
When you need this service
- Your existing drive is cracked, sinking or weed-covered
- You need extra off-road parking
- You’re selling and want better kerb appeal
- Water is pooling or draining toward the house
How to avoid overpaying
- Always get at least three written quotes per m²
- Make sure the sub-base depth is specified (75–150 mm)
- Check the installer is on a recognised register (e.g. Marshalls Approved)
- Avoid cold-callers offering ‘leftover materials’ deals
- Ask for a written guarantee of at least 5–10 years
Everyday impact
A new driveway boosts kerb appeal and can add 5–10% to your home’s value. A poorly laid drive sinks within a year and can cost more to redo than it did to install.
Get your instant estimate
Use our Driveway Cost Calculator to see a realistic UK low, average and high price range before you request quotes from local tradespeople.
Related calculators for this project
Fence Installation Cost Calculator
Estimate the cost of new fencing by length, panel type, posts and gate requirements.
Roof Replacement Cost Calculator
Estimate the cost of replacing your roof by property type, material, size and region.
Gutter Replacement Cost Calculator
Estimate the cost of replacing your guttering by property type, material and access.
House Rewire Cost Calculator
Estimate the cost of a full or partial house rewire by property size, type and region.
Check a real quotation for this job
Get matched with vetted UK driveway specialists and compare like-for-like prices. Enter the figure you've been quoted to see whether it sits within the expected range for your area, or upload the written quotation to have it examined line by line.
How to use this: TradesChecker is an independent service for UK customers. Estimates are indicative, not a quotation or a survey — specification, access, location, materials, VAT and site conditions all affect real prices. Commercial relationships never determine what we report about a quotation. Read our methodology.
Related cost guides
UK Cost Guide
Fence Installation Cost UK 2026: £100–£220 per Panel
Expect £100–£200 per fitted panel including posts in 2026, or £1,200–£3,500 for a typical UK back garden.
UK Cost Guide
House Extension Cost UK (2026 Guide + Local Prices)
Most UK homeowners pay £1,800–£3,200 per m² for a single-storey extension in 2026. Double-storey work costs more in total but usually less per m² of floor area — around £1,600–£2,800.
UK Cost Guide
Damp Proofing Cost UK (Rising Damp and Treatment Costs)
Most UK homeowners pay £300–£500 per metre treated for rising damp, or £1,500–£4,000 for a typical room including replastering in 2026.