Free UK cost calculator

    Driveway Cost Calculator

    Estimate the cost of a new driveway in the UK. Enter the area and choose a surface, sub-base and any extras to see a low, typical and high figure with a full breakdown, the expected time on site, drainage requirements and the factors most likely to increase the price.

    Page review date (not price evidence):

    Your details

    m²

    Length × width. A typical two-car driveway is around 35–50 m².

    Break out and remove the existing surface
    Drainage channel or soakaway
    Edging kerbs
    Dropped kerb application and works
    Waste removal included

    Enter a UK postcode (e.g. SW1A, M1, B15) and we'll pick the right regional pricing.

    Indicative estimated cost

    £6,650 – £12,700

    GBP total for the selected job · Model guide: £9,700 (not an observed average)

    Driveway

    No postcode area supplied · Midlands · broad regional model, not a local quote

    Your selected scope
    Driveway area
    40 m²
    Surface
    Block paving
    Sub-base
    New 100–150 mm MOT type 1 base
    Break out and remove the existing surface
    Yes
    Drainage channel or soakaway
    Yes
    Edging kerbs
    Yes
    Dropped kerb application and works
    No
    Waste removal included
    Yes
    Access
    easy
    Timing
    Standard booking
    VAT
    Includes modelled VAT at 20%
    Low
    £6,650
    Model guide
    £9,700
    High
    £12,700
    Priced on 40 m². Compare surfaces to see how much the finish drives the total.

    What this estimate covers

    Labour
    Included

    Priced in the model: Excavate and remove the existing surface; Groundwork and laying labour.

    Materials
    Included

    Priced in the model: Sub-base — new 100–150 mm mot type 1 base; Block paving materials (40 m²); Drainage — channel drain and soakaway; Edging kerbs and haunching.

    VAT
    Included

    The range shown includes VAT at 20% because you chose to show prices including VAT. Whether VAT applies to a contractor's quote depends on whether they are VAT-registered.

    Waste removal
    Included

    Priced in the model: Waste removal — One builders skip (8 yd).

    Access costs
    Not confirmed

    The model does not price this explicitly. It may be needed for your job; ask the contractor.

    Preparation
    Included

    Priced in the model: Excavate and remove the existing surface; Groundwork and laying labour.

    Estimates are indicative model guide prices for the selected scope and unit, not a quotation. Real prices vary with specification, access, location, materials and site conditions. Whether VAT is charged depends on the contractor and the type of work, so always check what your own quotation states.

    Figures shown include VAT at 20%.

    Compare your quote

    Mark what your written quote says it covers. Your answers stay in this browser tab only and are not saved or sent anywhere.

    These prices may cover different work. Confirm the inclusions before comparing totals.

    Estimate inclusions alongside your quote
    ItemEstimateYour quoteResult
    LabourIncludedNot confirmedUnknown

    Ask: Is all labour in the total, including any extra days if the job overruns?

    MaterialsIncludedNot confirmedUnknown

    Ask: Which materials are supplied in the price, and at what specification or brand?

    VATIncludedNot confirmedUnknown

    Ask: Are you VAT-registered, and is VAT included in this total or added on top?

    Waste removalIncludedNot confirmedUnknown

    Ask: Is removal and disposal of waste (skip, licensed carrier, tip fees) included?

    Access costsNot confirmedNot confirmedUnknown

    Ask: Does the price include scaffolding, towers or other access equipment, and for how long?

    PreparationIncludedNot confirmedUnknown

    Ask: Does the price include stripping out, preparation and making good afterwards?

    Total£6,650 – £12,700Not enteredShown side by side only; not adjusted or judged.

    What can change your price

    General job guidance, not evidence of local prices or a promise that every item is included. Selected options are modelled; other site conditions may require a separate quotation.

    • Area and shape — small or awkward areas cost more per square metre because of set-up and cutting.
    • Surface — gravel is the cheapest finish; resin-bound and porcelain sit at the top end.
    • Excavation depth and sub-base — a driveway carrying vehicles needs more stone than a patio.
    • Ground conditions and disposal — clay, obstructions or contaminated spoil add tipping costs.
    • Drainage — surface water must be dealt with on site or through a permeable surface to meet the rules.
    • A dropped kerb, which is a separate council application with its own fee and highways works.

    Questions to ask before comparing written quotes

    • What measured area, excavation depth and sub-base build-up are included?
    • How will drainage and edge restraints be dealt with?
    • Are spoil disposal, plant hire and any dropped kerb itemised?
    • What is the final total with VAT, payment stages and a written process for approving extras?

    Basis and limits of this estimate

    Source: fixed rates and allowances built into this calculator, used as indicative model assumptions. No linked price source, verified quote provenance, sample size or evidence-based confidence score is available for these rates. The separate seeded price database does not power this calculation.

    Freshness: no evidence update date is recorded for the fixed rates. A page review date or calculation date is not a price-evidence update. Rates may be out of date; check current written quotations.

    Location: Midlands uses a model regional multiplier of ×1.00 against the Midlands baseline. The adjustment is applied fully to labour, at 70% strength to hire, at 30% strength to materials and not to fixed costs. These are broad model assumptions, not measured local quote differences. Scotland, Wales and Northern Ireland share the North bracket; no separate local rates are used.

    Method: Existing model line items are added after regional, timing and selected access adjustments; the VAT option adds 20% when selected. The breakdown and arithmetic assumptions are shown below.

    Uncertainty: this is a broad starting range, not a local market survey, guaranteed fair price or quotation. The midpoint is a model guide, not an observed average or the price most jobs pay. Unknown site conditions and specification changes can move actual quotations outside this range; the range is not a statistical confidence interval.

    Cost breakdown

    Estimated cost by element of the job
    ElementLowHigh
    Excavate and remove the existing surfaceLabour

    Breaking out concrete costs more than lifting slabs or gravel.

    £550£1,050
    Sub-base — new 100–150 mm mot type 1 baseMaterials£800£1,450
    Block paving materials (40 m²)Materials£1,200£2,400
    Groundwork and laying labourLabour£1,800£3,200
    Drainage — channel drain and soakawayMaterials

    Required under permitted development unless the surface is permeable and water drains to a border.

    £450£900
    Edging kerbs and haunchingMaterials£250£600
    Waste removal — One builders skip (8 yd)Hire / disposal

    Excavated spoil is heavy; a grab lorry is often cheaper than several skips.

    £320£550
    Plant hire — digger, dumper and compactionHire / disposal£180£450
    Subtotal excluding VAT£5,550£10,600
    VAT at 20%£1,100£2,100
    Total including VAT£6,650£12,700

    These are model allowances for your selected specification, not supplier quotations. Labour, materials and hire are the model's categories, not independently verified costs. Lines and totals are rounded separately, so displayed lines may not sum exactly to the total.

    Modelled duration

    2.5–4.5 working days

    Based on a crew of 2.5 working around 8 hours a day.

    Working days on site, not calendar days. Ordering materials, scaffolding and weather can spread the same work over a longer period.

    Reasons the price could rise

    • Soft ground or clay needing a deeper dig and more sub-base than allowed for.
    • Buried services, drains or an old inspection chamber that must be raised.
    • A sloping site needing levels, steps or a retaining edge.
    • Surface water rules: a non-permeable drive over 5 m² draining to the highway needs planning permission or drainage.
    • Resin and porcelain are weather-dependent and cannot be laid in the wet or cold.

    Modelled inclusions — priced items

    Only the items costed by the model are listed; these are not guarantees of what a contractor will include. Removal labour does not mean off-site disposal unless a disposal allowance is listed.

    • Excavate and remove the existing surface
    • Sub-base — new 100–150 mm mot type 1 base
    • Block paving materials (40 m²)
    • Groundwork and laying labour
    • Drainage — channel drain and soakaway
    • Edging kerbs and haunching
    • Waste removal — One builders skip (8 yd)
    • Plant hire — digger, dumper and compaction

    Exclusions and work to quote separately

    • Retaining walls, steps and significant level changes
    • Gates, fencing, lighting and electrical work
    • Tree root removal or dealing with Japanese knotweed
    • Diverting or protecting buried utilities
    • Dropped kerb application and footway crossing

    Have a quotation for this work?

    Compare it against this range, then have the written quotation examined line by line — including the items that may be missing from it.

    How we worked this out

    Calculated on (not an evidence update date) · Area used: Midlands (regional adjustment ×1.00) · Standard booking

    This is a fixed-rate model; no evidence-based confidence rating is available.

    Methodology
    • Driveways are priced per square metre in three layers — excavation, sub-base and surface — with drainage, edgings, plant hire and any dropped kerb added separately.
    • Block paving and porcelain carry higher labour rates per square metre than tarmac or gravel because of cutting and setting out.
    • We price each part of the job separately — labour, materials, plant hire and fixed costs — then add them up, rather than applying one blanket rate.
    • Regional adjustment is applied in full to labour, at about 70% to plant hire and at about 30% to materials, because materials are largely priced nationally.
    • An emergency or urgent booking adds about 50% to labour, 20% to hire and 10% to materials. Fixed costs such as permits and certificates do not change.
    • Figures are rounded to a sensible step (£10 to £500 depending on size), because the underlying data does not support pound-level precision.
    Model assumptions used
    • Priced on 40 m² of reasonably level ground with vehicle access for a small digger and tipper.
    • No retaining structures or significant reprofiling are required.
    • The property is a standard UK domestic property in reasonable condition, with no structural defects found once work starts.
    • Work is carried out by a competent VAT-registered contractor to current Building Regulations.
    • Prices are for the work described only, and assume the customer is not supplying their own materials.
    • VAT at 20% is included in the figures shown.
    • Access was assumed to be straightforward, with somewhere to park and unload.

    This is an indicative estimate for UK customers, not a quotation, a survey or a valuation. It uses fixed model rates and your answers, not verified quotations. Unknown property conditions are not surveyed; no evidence-based widening of this range is performed. Obtain comparable written quotations before committing.

    Frequently asked questions

    Do I need planning permission?

    For a new or replacement driveway at a house, permission is usually not needed if the surface is permeable or surface water drains to a soakaway or border within your property. Non-permeable surfaces draining to the highway generally do need permission. Always confirm with your local authority.

    Is a dropped kerb included?

    Only if you select it, and it is shown as a fixed cost. Dropped kerbs are applied for through the local highways authority, which sets the fee and specifies who may carry out the work, so the figure is an allowance rather than a quotation.

    Why does the sub-base matter so much?

    It is what carries the vehicle load. A driveway laid on too little stone will rut and sink regardless of how good the surface looks, so a quotation should always state the excavation depth and the sub-base build-up.

    What is the difference between standard and emergency timing?

    Standard assumes a normal booking. Emergency covers urgent work such as making a damaged access safe, and adds about 50% to labour, 20% to plant hire and 10% to materials; fixed costs such as council fees are unchanged.

    Is VAT included?

    You can show prices with or without VAT at 20%. Groundworks contractors are commonly VAT registered — worth checking before comparing two quotations.

    Use this range as your benchmark, then have your written quotation examined line by line — including what may be missing from it.

    How to use this: TradesChecker is an independent service for UK customers. Estimates are indicative, not a quotation or a survey — specification, access, location, materials, VAT and site conditions all affect real prices. Commercial relationships never determine what we report about a quotation. Read our methodology.

    Related cost guides

    Related Calculators